Designs

Uxbridge Wall Mounted Entrance Canopy

Developed from the standard freestanding column supported version, the wall mounted polycarbonate clad Uxbridge entrance canopy design removes the requirement for columns fixed to the ground by fixing directly to the rear wall supporting structure. As standard the roof is clad in solid clear polycarbonate. Cantilevering the canopy implies a considerable additional loading onto the existing wall, it is important to consider this at the outset of the project design stage to accommodate the imposed loads.

Downloads

Uxbridge Entrance Canopy

Specification

Guarantees: Framework - 25 years | Polycarbonate Cladding - 10 years proportional against discolouration through sunlight
Size: The maximum width for the Uxbridge is around 5m, but each canopy is fabricated to suit the clients requirements
Applicable Standards: UKCA Marked structural steel fabricated in accordance with BS EN1090, designed in accordance with BS EN 1990,91,92,93,97 for Wind & Snow Loadings (replaced BS6399 Pt.2 - Wind & Snow Loadings; BS5950 - Structural Use of Steelwork in Buildings)
Roof Shape: Low Rise Barrel Vault
Solid Polycarbonate: Flame Retardant (Class 1) Solid Sheet Clear Polycarbonate with a 10 year proportional guarantee against discolouration from sunlight
Polycarbonate Cladding: Flame Retardant (Class 1) Structured Opal (opaque) or Clear Polycarbonate with a 10 year proportional guarantee against discolouration from sunlight
Cladding Fixing: Two part Aluminium Glazing Bar with rubber gaskets to allow for thermal expansion of the roofing sheets and secure fixing
Standard Finish: Shot blast, zinc primed, and polyester powder coated to any standard BS/RAL Classic colour
Rainwater Goods: Colour coded Aluminium gutters ARE NOT included as standard on this model, but are available if required (at extra over cost) to both eaves sides, with downpipes terminating at ground level
Building Fixings: Bolted to concrete, steelwork or brickwork - subject to SE approval, with stainless or mild steel feature tie rods if required

make an enquiry

Why Clovis Canopies?

British made

Made to measure

Up to 25 year framework guarantee & 50 year structural design life

All year round use

After sales service

Designs

Related Designs

Cambridge Cantilever Wall Mounted Canopy

The Cambridge style covers a small range of canopies for use as entrance canopies or covered walkways. The basic principle is based on bladed ‘glazing’ supports that are either cantilevered…

Apollo Entrance Canopy

The polycarbonate clad Apollo entrance canopy is one of the most popular of our entrance canopy designs. The Apollo is supported by two or more columns and is entirely freestanding.…

Uxbridge Entrance Canopy

The polycarbonate clad Uxbridge entrance canopy is the most popular standard design of our entrance canopy range. The Uxbridge is supported by two or more columns and is either entirely…

Oxford Entrance Canopy

The Oxford entrance canopy can either be clad with flame retardant waterproof PVC fabric or polycarbonate. Generally secured and supported by four columns, the Oxford entrance canopy uses the popular…

View All Designs

Projects

Example Projects

Magnet House – Entrance Canopy

This modernistic, wave, polycarbonate roofed, 2m deep x 4.8m wide entrance canopy provides an aesthetic line over a large glass frontage. The simple but eye-catching design draws your attention to…

Robin Pinto Unit, Luton & Dunstable Hospital – Entrance Canopy

A wall mounted cantilevered entrance canopy Clean, sharp arch in 6mm clear or opaque polycarbonate, for good light levels. Variety of sizes to suit all needs, whether residential, industrial or bespoke.

Nikon Offices – Entrance Canopy

After a brief exchange of e-mails with the architects at Space Solutions the final touches to a development for Nikon were agreed. Designed in association with the Architects and their…

Hobsons International – Entrance Canopy

This prestigious office in west London needed to protect their clients and visitors awaiting entry, without detracting from the buildings classic architecture. This bespoke canopy was designed to follow the…

Lime Trees Unit, Luton & Dunstable Hospital – Entrance Canopy

A wall-mounted, large, arched entrance canopy Supported by stainless steel tie rods and wall brackets. Overhead protection against rain and snow with minimal light reduction 1.8m deep x 5.7m wide

Sandringham School

The two storey and single storey building recently installed where the wall mounted Uxbridge cantilever canopy was installed over 3No door access points, a colour coded framework to matched building…

Sandringham School – Entrance Canopy

Traditional Uxbridge wall mounted cantilever canopy has recently been installed to match the previous installations

Addept Computer Services Ltd

A wall mounted Uxbridge Cantilevered entrance canopy with glass clear 6mm solid sheet polycarbonate.

We have been very satisfied with the work. The installers have respected the work going on within the centre and have worked around us. We would highly recommend Clovis for standard of service.

S Warner, Little Forest Children's Centre

Just to let you know how pleased we are with our lovely new shelter. It looks great and fits in very well with our entrance. Will send you photo when we take one. Also wanted to congratulate your workmen on how polite and accommodating they were to schools needs. They are exceptionally sympathetic about children and parents using the entrance while they were working and went out of their way to please everybody in school. They were pleasure to have on the premises. Please pass on our thanks to them and to the Contract Manager who made everything happen so smoothly.

A McGourty, St Augustine's Primary

The two engineers that were working on the installation were extremely professional and we had no issues during installation - very well done, looks terrific!

AP Barker, Winns Primary

I’d like to take this opportunity to say a huge ‘thank you’ to everyone at your firm, for the patience and professionalism that has been shown to use here at the school, bearing in mind the length of time it has taken for this project to be completed!! The end result is fantastic. The build and finish are of high quality and already on our first day back at school we have received many compliments. On a personal note my headteacher, Elaine Cooper, would like to pass on her personal praise for the workmen that installed the canopy during August, they worked really hard and were always professional. Thank you. I will have no hesitation in recommending you to other schools in the area.

F Girdler, School Business Manager, The Horsell Village School

Blog

FAQs

Frequently Asked Questions

Are your canopies usable all year in all weathers?: Yes unlike some solutions that need to be taken down in the winter or during high winds our canopies are designed to be useable all year round. The cladding materials as well as providing shade are also waterproof so that they can be used during wet weather.
Can we view existing canopies, so that we know what we are buying?: If you are considering purchasing a canopy from any company, it is in fact strongly recommended that you visit an existing installation to see exactly what you are paying for. At Clovis Canopies we are proud of our work and are happy to arrange (with the clients consent) for you to view examples of our work and structures.
Do you fix your canopies directly onto tarmac?: No, all canopies are fixed on to concrete pads or bases as the structures can lift out from the ground if not fixed into a suitable concrete base due to the uplift created by wind acting on the roof area.
Do you use Polycarbonate, PETG, GRP or Acrylic for non fabric cladding?: At Clovis Canopies we use polycarbonate roofing as although slightly more expensive, we find it has a better combination of strength, impact resistance, sheet size and colour, fire / flame resistance and longevity of life than any of the other above mentioned cheaper materials.