General Use Canopies

Keston Forecourt Cantilever Canopy

Our EV charging canopy shelters offer an ideal and cost-effective solution for protecting your chargers and equipment, as well as customer vehicles whilst they are being charged during inclement weather.…

Clifton Cantilever Canopy

The Clifton Cantilever canopy’s main feature is the framework strengthening double column configuration which enables the arms that carry the canopy at higher heights to extend further than if single…

Ascot Barrel Vault Canopy

The Ascot Barrel Vault design uses a single rolled box section for the roof arches giving a clean line to the roof. The barrel format brings the eaves down on…

Oxford Barrel Vault Canopy

The Oxford Barrel Vault twin hoop, trellis arch design is one of the most popular in our range of canopies. The barrel format brings the eaves down on either side…

Oxford XL Barrel Vault Canopy

The Oxford XL Barrel Vault is a large span canopy structure using a trellis arch design. It is ideal for large communal areas such as covered outdoor dining and recreation…

Crescent Barrel Vault Canopy

The Crescent Barrel Vault is a large span canopy structure using a tapered trellis arch design. It is ideal for large communal areas such as covered outdoor dining and recreation…

Ascot Lean-to Canopy

The Ascot lean-to design uses a single rolled box section for the roof arches giving a clean line to the roof. The lean-to format can be used to butt up…

Ascot Wave Form Canopy

The Ascot Wave Form canopy design is an alternative to the standard lean-to and barrel vault styles. It uses a single rolled box section for the roof arches giving a…

Keston Mono-pitch Lean-to Canopy

The Keston Mono-pitch Lean-to canopy is purpose designed for the public market, this is not a lightweight domestic canopy designed for the domestic patio. Using large structural steel sections uninterrupted…

Keston Mono-pitch Lean-to Walkway Canopy

Polycarbonate or glass cladding, mono-pitch lean-to style walkway canopy. Downloads Keston Polycarbonate

Keston Dual-pitch Canopy

The Keston Dual-pitch canopy is purpose designed for the public market, this is not a lightweight domestic canopy designed for residential patio areas. Using structural steel sections large uninterrupted spans…

Oxford Cantilever Gull-wing Canopy

The Oxford Cantilever Gull-wing structure is ideally used as a covered walkway, although it can be used as an entrance canopy or waiting shelter. Supplied clad with either a waterproof…

Oxford Wave Form Canopy

The Oxford twin hoop waveform is an alternative to the standard lean-to or barrel vault style canopies. Due to the double curvature, it is only available with polycarbonate cladding. The…

Cambridge Cantilever Gull-wing Canopy

The Cambridge Cantilever Gull-wing structure can be used as an entrance canopy or extended to create a covered walkway. Supplied clad with either polycarbonate, or bolted glass, or glass laid…

Ascot Cantilever Walkway Canopy

The Ascot Cantilever walkway canopy uses a more substantial single piece hoop. The roof of the canopies can either be clad with flame retardant waterproof PVC fabric or polycarbonate.

Ascot Walkway Canopy

The Ascot Barrel vault design uses a single rolled box section for the roof arches giving a clean line to the roof. The barrel format brings the eaves down on…

Keston Dual-pitch Walkway Canopy

A dual-pitched walkway canopy clad with either polycarbonate or glass. Downloads Keston Polycarbonate

Oxford Cantilever Walkway Canopy

Ideal for narrower play areas or covered walkway shelters, the Oxford twin hoop, trellis arch design is one of the most popular in our range of canopies. The cantilever format…

Cambridge Cantilever Wall Mounted Canopy

The Cambridge style covers a small range of canopies for use as entrance canopies or covered walkways. The basic principle is based on bladed ‘glazing’ supports that are either cantilevered…

Cambridge Cantilever Walkway Canopy

The Cambridge Cantilever free standing structure can be used as an entrance canopy, or extended to create a covered walkway. Supplied clad with either bolted glass, polycarbonate or 6.4mm laminated…

Uxbridge Wall Mounted Entrance Canopy

Developed from the standard freestanding column supported version, the wall mounted polycarbonate clad Uxbridge entrance canopy design removes the requirement for columns fixed to the ground by fixing directly to…

Cambridge Cantilever Entrance Canopy

The Cambridge Cantilever free standing structure can be used as an entrance canopy, or extended to create a covered walkway. Supplied either with bolted glass, polycarbonate or 6.4mm laminated glass…

Keston Cantilever Entrance Canopy

The Keston Cantilever entrance canopy uses a box section straight arm. The roof of the canopy can be clad with either polycarbonate or glass into a patent glazing bars, or…

Kent Umbrella Canopy

A fresh addition to our large range of canopies and shelters, we are pleased to introduce the Kent Umbrella. Contemporary and stylish the Kent Umbrella can be used to further…

Bespoke Canopies

We can fabricate almost any size and shape canopy, using fabric, polycarbonate or glass as the cladding material. Our standard structures and canopies are available in a wide variety of…